Fujitsu FibreCAT TXF, Operating Manual

Page: 22 / 57

22 Operating Manual
FibreCAT TXF
Rack requirements Installation
DataCenter Rack
– Telescopic rails screwed to the front (except in the rear left area, where a
support bracket is used).
– Enhanced cable management in the lateral rack area.
The mounting of the rails in the different racks is described in the next sections.
Installation of the cable management is described in detail in the Technical
Manual for the respective rack.
3rd party rack
The following general conditions apply to rack systems of several other
manufacturers:
– Installation dimensions (see the dimensions shown in figure 3 on page 24 ):
– You must ensure that the safety mechanisms on the server, e.g. stoppers or
retaining systems, are functioning correctly.
– The shape of the rack support uprights must ensure that the telescopic rails
can be bolted at the front.
1 Front of rack
2 Rear of rack
A Rack depth (comparison PRIMECENTER Rack 1000/1100 mm)
B Rack width (comparison PRIMECENTER rack 700 mm)
C Clearance for 19” installation level
C1 Front 19” installation level
C2 Rear 19” installation level
D Cable routing area (cable area depth) and ventilation
E Space for front panel and ventilation
F Space for right and left support systems
P Rack installation depth
a1 Front left support upright
a2 Front right support upright
b1 Rear left support upright
b2 Rear right support upright