manualshive.com logo in svg

Fujitsu fi-4860C, Operator'S Manual

Share
Download
Fujitsu fi-4860C Operator'S Manual Download Page 88

2-18

2.5 Detecting Double-Feeds

3.

Select the detection conditions from [Double Feed Detection] under [ADF 
Option].

The following are the detection conditions

Furthermore, refer to "APPENDIX2  DOUBLE-FEED DETECTION 
CONDITIONS" on page AP-2 for detailed information about the document for 
double-feed detection.

4.

Click the [OK] button.

The display returns to the [TWAIN Driver] dialogbox. Then, perform the 
scanning operation on the dialogbox.

None

Double-feed detection is not performed

Check 
overlapping

The scanner monitors for the overlapping of documents. It 
detects a double-feed by differences in document thickness 
when two or more document sheets are fed overlapped.

Check length

The scanner monitors the length of documents. It detects a 
double-feed by differences in the document length when two 
or more document sheets are fed overlapping.

Check 
overlapping and 
length

The scanner monitors both document overlapping and 
length to detect double-feeds.

Summary of Contents for fi-4860C


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands