manualshive.com logo in svg

Fujitsu fi-4860C, Operator'S Manual

Share
Download
Fujitsu fi-4860C Operator'S Manual Download Page 210

7-4

7.1 Setup Mode

■

Function of buttons in setup mode

■

Transitions of screens in setup mode 

Refer to the next page LCD screen transitions chart for setup mode.

The flow chart in the following pages show transition of the LCD screen. 
Some of the details are not expressed in the chart. 
For the details, please refer to the descriptions in "7.2  Setup mode functions" on page 7-10.

Button name

Function

 [Next]

Displays the next menu item without saving the change. 
Referred to as Next button in this manual. 

 [Previous]

Displays the previous menu item without saving the change. 
Referred to as Previous button in this manual. 

Moves to the right item on the menu 
Referred to as Right arrow button in this manual. 

Moves to the left item on the menu 
Referred to as Left arrow button in this manual. 

- Saves the change and then displays the next menu item
- Moves to the lower level menu item 
Referred to as Enter button in this manual. 

Moves to the upper level menu item without saving the change
Referred to as Exit button in this manual. 

Summary of Contents for fi-4860C


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands