manualshive.com logo in svg

Fujitsu ETERNUS DX S5 Series, Design Manual

The Fujitsu ETERNUS DX S5 Series comes with an easy-to-understand Operation Manual (Basic) that provides comprehensive guidance for users. This manual can be downloaded for free from our website, allowing you to access all the necessary information about your product effortlessly. Find it at manualshive.com, ensuring a smooth user experience.

Share
Download
background image

Logical Device Expansion.................................................................................................................................77

LUN Concatenation ..........................................................................................................................................78

Wide Striping ...................................................................................................................................................80

Data Encryption........................................................................................................................ 82

Encryption with Self Encrypting Drive (SED).....................................................................................................83

Firmware Data Encryption ...............................................................................................................................84

Key Management Server Linkage ....................................................................................................................85

User Access Management......................................................................................................... 88

Account Management......................................................................................................................................88

User Authentication.........................................................................................................................................90

Audit Log .........................................................................................................................................................92

Environmental Burden Reduction............................................................................................. 93

Eco-mode ........................................................................................................................................................93

Power Consumption Visualization....................................................................................................................96

Operation Management/Device Monitoring ............................................................................. 97

Operation Management Interface....................................................................................................................97

Performance Information Management ..........................................................................................................98

Event Notification ..........................................................................................................................................100

Device Time Synchronization .........................................................................................................................102

Remote Support.............................................................................................................................................103

Power Control ......................................................................................................................... 105

Power Synchronized Unit ...............................................................................................................................105

Remote Power Operation (Wake On LAN)......................................................................................................106

Backup (Advanced Copy)........................................................................................................ 107

Backup (SAN).................................................................................................................................................108

Backup/Restore (NAS)....................................................................................................................................120

Performance Tuning ............................................................................................................... 121

Assigned CMs.................................................................................................................................................121

Striping Size Expansion..................................................................................................................................122

Smart Setup Wizard ................................................................................................................ 123

3.  

SAN Functions..................................................................................................... 128

Operations Optimization (Deduplication/Compression) ......................................................... 128

Deduplication/Compression ...........................................................................................................................128

Improving Host Connectivity................................................................................................... 137

Host Affinity...................................................................................................................................................137

Table of Contents
 

3

Design Guide

Summary of Contents for ETERNUS DX S5 Series
















































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX S5 Series

LaCie 5BIG NAS PRO Quick Install Manual preview
5BIG NAS PRO
Brand: LaCie Pages: 22
Harsco Taylor-Wharton XL-65 Instructions Manual preview
Taylor-Wharton XL-65
Brand: Harsco Pages: 26
IBM System Storage EXN2000 Installation And Setup Instructions preview
System Storage EXN2000
Brand: IBM Pages: 14
Jefferson JEFTBX05A User Manual preview
JEFTBX05A
Brand: Jefferson Pages: 2
Onnto RS-M4QO User Manual preview
RS-M4QO
Brand: Onnto Pages: 40
Seagate HAWK 4 Product Manual preview
HAWK 4
Brand: Seagate Pages: 68
U-Line H-8184 Manual preview
H-8184
Brand: U-Line Pages: 39
Denios PolySafe Depot Type C User Manual preview
PolySafe Depot Type C
Brand: Denios Pages: 8
NCR 7702-K260 Kit Instructions preview
7702-K260
Brand: NCR Pages: 10
IBM TS7650 PROTECTIER DEDUPLICATION APPLIANCE Installation Roadmap Manual preview
TS7650 PROTECTIER DEDUPLICATION APPLIANCE
Brand: IBM Pages: 218
SilverStone TOWER STORAGE TS421S Manual preview
TOWER STORAGE TS421S
Brand: SilverStone Pages: 52
Hama 55051 Operating Instructions Manual preview
55051
Brand: Hama Pages: 8
HOLZMANN MASCHINEN WB160L Assembly Instruction Manual preview
WB160L
Brand: HOLZMANN MASCHINEN Pages: 18
Maxtor 2B010H1 Product Manual preview
2B010H1
Brand: Maxtor Pages: 65
Seagate ST625211CF Installation Manual preview
ST625211CF
Brand: Seagate Pages: 2
Sony MS-EX1G Operating Instructions preview
MS-EX1G
Brand: Sony Pages: 2
Netstor NA762A-G3 User Manual preview
NA762A-G3
Brand: Netstor Pages: 19
Netstor NA622TB3 User Manual preview
NA622TB3
Brand: Netstor Pages: 23

Brands by name

Popular brands

Load more brands