manualshive.com logo in svg

Fujitsu ETERNUS DX S5 Series, Design Manual

The Fujitsu ETERNUS DX S5 Series comes with an easy-to-understand Operation Manual (Basic) that provides comprehensive guidance for users. This manual can be downloaded for free from our website, allowing you to access all the necessary information about your product effortlessly. Find it at manualshive.com, ensuring a smooth user experience.

Share
Download
background image

Backup (SAN)

Local Copy

The Advanced Copy functions offer the following copy methods: "Mirror Suspend", "Background Copy", and "Copy-
on-Write". The function names that are given to each method are as follows: "EC" for the "Mirror Suspend"
method, "OPC" for the "Background Copy" method, and "SnapOPC" for the "Copy-on-Write" method.
When a physical copy is performed for the same area after the initial copy, OPC offers "QuickOPC", which only
performs a physical copy of the data that has been updated from the previous version. The function
only copies data that is to be updated and performs generation management of the copy source volume.

●

OPC
All of the data in a volume at a specific point in time is copied to another volume in the ETERNUS DX.
OPC is suitable for the following usages:

•

Performing a backup

•

Performing system test data replication

•

Restoring backup data (restoration after replacing a drive when the copy source drive has failed)

●

QuickOPC
QuickOPC copies all data as initial copy in the same way as OPC. After all of the data is copied, only updated
data (differential data) is copied. QuickOPC is suitable for the following usages:

•

Creating a backup of the data that is updated in small amounts

•

Performing system test data replication

•

Restoration from a backup

●

SnapOPC /
As updates occur in the source data, SnapOPC/ saves the data prior to change to the copy
destination (SDV/TPV/FTV). The data is physically stored in the SDP/TPP/FTRP prior to changes in the updated
area.
Create an SDPV as an expansion SDV area when performing SnapOPC/ by specifying an SDV as the
copy destination. SDPVs are managed as volumes that configure a Snap Data Pool (SDP). Only one SDP is
configured in the ETERNUS DX.
SnapOPC/ is suitable for the following usages:

•

Performing temporary backup for tape backup

•

Performing a backup of the data that is updated in small amounts (generation management is available
for )

•

SnapOPC/ operations that use an SDV/TPV/FTV as the copy destination logical volume have the
following characteristics. Check the characteristics of each volume type before selecting the volume type.

Table 47

 

Characteristics of SnapOPC/ Operations with Each Type of Copy Destination Logical

Volume

Item to compare

SDV

TPV/FTV

Ease of operation
settings

The operation setting is complex because a
dedicated SDV and SDP must be set

The operation setting is easy because a dedicated SDV
and SDP are not required

Usage efficiency of the
pool

The usage efficiency of the pool is higher
because the allocated size of the physical
area is small (8KB)

The usage efficiency of the pool is lower because the
allocated size of the physical area is large with a chunk
size of 21MB / 42MB / 84MB / 168MB / 336MB

2. Basic Functions

Backup (Advanced Copy) 

108

Design Guide

Summary of Contents for ETERNUS DX S5 Series
















































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX S5 Series

NEC S2500 User Manual preview
S2500
Brand: NEC Pages: 106
Qcells Q.HOME+ESS HYB-G2 Installation Training preview
Q.HOME+ESS HYB-G2
Brand: Qcells Pages: 26
Seagate STEA2000400 Faq preview
STEA2000400
Brand: Seagate Pages: 21
Asgard GLADIATOR PLUS 2 Quick Start Manual preview
GLADIATOR PLUS 2
Brand: Asgard Pages: 6
Maxtor MaXLine II 250 Product Manual preview
MaXLine II 250
Brand: Maxtor Pages: 50
i3 International SAN iS316 User Manual preview
SAN iS316
Brand: i3 International Pages: 89
IBM EXN4000 Installation And Setup Instructions preview
EXN4000
Brand: IBM Pages: 18
7-BIT Wicher CDTV User Manual preview
Wicher CDTV
Brand: 7-BIT Pages: 8
extraspace expandacom Assembly Instructions Manual preview
expandacom
Brand: extraspace Pages: 16
E-Z-RECT TYPE 1 Assembly Instructions preview
TYPE 1
Brand: E-Z-RECT Pages: 2
LaCie LaCie Ethernet Big Disk User Manual preview
LaCie Ethernet Big Disk
Brand: LaCie Pages: 47
Fujitsu MAY2036RC Product/ Product/Maintenance Manual preview
MAY2036RC Product/
Brand: Fujitsu Pages: 94
Fujitsu MAX3036NC Maintenance Manual preview
MAX3036NC
Brand: Fujitsu Pages: 130
Fujitsu MBA3073FD Product Manual preview
MBA3073FD
Brand: Fujitsu Pages: 106
Fujitsu MBC2036RC SERIES Installation Manual preview
MBC2036RC SERIES
Brand: Fujitsu Pages: 1
Fujitsu MBB2073RC SERIES Product Manual preview
MBB2073RC SERIES
Brand: Fujitsu Pages: 98
Fujitsu MAX3036RC SERIES Product/Maintenance Manual preview
MAX3036RC SERIES
Brand: Fujitsu Pages: 94
Fujitsu MAX3036FC Product/Maintenance Manual preview
MAX3036FC
Brand: Fujitsu Pages: 112

Brands by name

Popular brands

Load more brands