manualshive.com logo in svg

Fujitsu ETERNUS DX S5 Series, Design Manual

The Fujitsu ETERNUS DX S5 Series comes with an easy-to-understand Operation Manual (Basic) that provides comprehensive guidance for users. This manual can be downloaded for free from our website, allowing you to access all the necessary information about your product effortlessly. Find it at manualshive.com, ensuring a smooth user experience.

Share
Download
background image

AdvancedCopy Manager cannot be shared. Make sure to use only one type of software to manage a
RAID group.

•

Use ETERNUS Web GUI or ETERNUS CLI to set Eco-mode for TPPs. ETERNUS SF Storage Cruiser or ETERNUS
SF AdvancedCopy Manager cannot be used to set the Eco-mode for TPPs and FTRPs.

•

Specify the same Eco-mode schedule for the RAID groups that configure a WSV. If different Eco-mode
schedules are specified, activation of stopped disks when host access is performed occurs and the
response time may increase.

•

Eco-mode schedules are executed according to the date and time that are set in the ETERNUS DX. To
turn the disk motor on and off according to the specified schedule, set the Network Time Protocol (NTP)
server in the date and time setting in ETERNUS Web GUI to automatically adjust the date and time.

•

If the number of disks that are activated in a single drive enclosure is increased, the time for disk
activation may take longer (about 1 to 5 minutes). This is because all of the disks cannot be activated at
the same time.

•

Even if the disk motor is stopped and spun up repeatedly according to the Eco-mode schedule, the
failure rate is not affected compared to when the motor is always on.

•

Even if Eco-mode is enabled, the disk motor may not stop or the disk may not turn off in an
environment where the server OS or software regularly accesses the ETERNUS DX.

 

Note

The operation time of disks varies depending on the Eco-mode schedule and the disk access.

•

Access to a stopped disk outside of the scheduled operation time period causes the motor of the stopped
disk to be spun up, allowing normal access in about one to five minutes. When a set time elapses since
the last access to a disk, the motor of the disk is stopped.

•

If a disk is activated from the stopped state more than a set amount of times in a day, the Eco-mode
schedule is not applied and disk motors are not stopped by the Eco-mode.
(Example 1) Setting the Eco-mode schedule via ETERNUS Web GUI
Operation schedule is set as 9:00 to 21:00 and there are no accesses outside of the scheduled period

21:00

9:00

1:00

0:00

Stop

Scheduled operation

Stop

The disk stops 10 minutes
after the scheduled operation

The motor starts rotating 
10 minutes before the scheduled operation

Operation

(Example 2) Setting the Eco-mode schedule via ETERNUS Web GUI
Operation schedule is set as 9:00 to 21:00 and there are accesses outside of the scheduled period

2. Basic Functions

Environmental Burden Reduction 

95

Design Guide

Summary of Contents for ETERNUS DX S5 Series
















































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX S5 Series

iDiskk mini Instruction Manual preview
mini
Brand: iDiskk Pages: 11
Seagate STEA2000400 Faq preview
STEA2000400
Brand: Seagate Pages: 21
LaCie grand Hard Disk Datasheet preview
grand Hard Disk
Brand: LaCie Pages: 2
trueCall Call Recorder Manual preview
Call Recorder
Brand: trueCall Pages: 16
IBM 4 GB Microdrive User Manual preview
4 GB Microdrive
Brand: IBM Pages: 98
Thecus D0204 Installation Manual preview
D0204
Brand: Thecus Pages: 6
Rorke Data Galaxy A16F-G2422 Installation And Hardware Reference Manual preview
Galaxy A16F-G2422
Brand: Rorke Data Pages: 108
Stardom ST5610-4S-WB Quick Installation Manual preview
ST5610-4S-WB
Brand: Stardom Pages: 108
Segger embOS-MPU Manual preview
embOS-MPU
Brand: Segger Pages: 56
GE AccessPoint 001890 User Instructions preview
AccessPoint 001890
Brand: GE Pages: 2
GE Digital Video Storage System User Manual preview
Digital Video Storage System
Brand: GE Pages: 24
GE Monogram ZWVS1000SR Owner'S Manual preview
Monogram ZWVS1000SR
Brand: GE Pages: 40
Craftsman 65088 Owner'S Manual & Assembly Manual preview
65088
Brand: Craftsman Pages: 56
ARAID 1500 User Manual preview
1500
Brand: ARAID Pages: 20
OWIM HG02137A Assembly And Safety Advice preview
HG02137A
Brand: OWIM Pages: 13
OWC THUNDERBAY Assembly Manual & User Manual preview
THUNDERBAY
Brand: OWC Pages: 8
Edgestore DAS501t User Manual preview
DAS501t
Brand: Edgestore Pages: 91
Allnet ALL69000 User Manual preview
ALL69000
Brand: Allnet Pages: 148

Brands by name

Popular brands

Load more brands