manualshive.com logo in svg

Fujitsu ETERNUS DX S5 Series, Design Manual

The Fujitsu ETERNUS DX S5 Series comes with an easy-to-understand Operation Manual (Basic) that provides comprehensive guidance for users. This manual can be downloaded for free from our website, allowing you to access all the necessary information about your product effortlessly. Find it at manualshive.com, ensuring a smooth user experience.

Share
Download
background image

The following types of host interfaces are available:

Table 76

 

Types of Host Interfaces

Type (operation mode)

Transfer rate

DX60 S5

DX100 S5
DX200 S5

DX500 S5
DX600 S5
DX900 S5

iSCSI 10Gbit/s
(10GBASE-SR/10GBASE-CR) (*1)

Fixed at 10Gbit/s

—

¡

¡

iSCSI 10Gbit/s
(10GBASE-T)

Specify one of the
following:

•

10Gbit/s

•

1Gbit/s

¡

¡

—

iSCSI 1Gbit/s
(1000BASE-T Full Duplex (FULL))

Fixed at 1Gbit/s

¡

¡

¡

¡

: Supported —: Not supported

*1: 

10GBASE-CR is a form of communication that uses Twinax cables and is 10GBASE-SR-compliant.

In order to maintain iSCSI performance, the iSCSI network should be physically separated from other types of
networks (such as networks for Internet access and file transfers).

•

Operation Mode
The iSCSI 10Gbit/s operation mode is 10GBASE-SR, 10GBASE-CR, or 10GBASE-T.
10GBASE-CR is a form of communication that uses Twinax cables and is 10GBASE-SR-compliant.
The iSCSI 1Gbit/s operation mode is 1000BASE-T Full Duplex (FULL).

•

CHAP
CHAP authentication can prevent unauthorized access. The following CHAP authentication methods are
supported:

-

Unidirectional CHAP

-

Bidirectional CHAP

•

Tag VLAN
The tag VLAN function is supported. 16 tags (VLAN ID) can be used for each port.

•

Jumbo Frame
Enabling Jumbo Frame makes data transfer more efficient by increasing the amount of data that can be
transferred for each Frame.

Table 77

 

Ethernet Frame Capacity (Jumbo Frame Settings)

Jumbo Frame settings

Ethernet frame capacity

Enabled

Up to 9000 bytes

Disabled

Up to 1500 bytes

Caution

Server-side CPU load can be reduced by using Jumbo Frame. However, I/O performance may be reduced
by 10% to 30%.

 

•

Security Architecture for Internet Protocol (IPsec)
The IPsec function is not supported. Connect the server using a LAN switch that has the IPsec function as
required.

5. Connection Configuration

SAN Connection 

211

Design Guide

Summary of Contents for ETERNUS DX S5 Series
















































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX S5 Series

Hama FlashPen "Piko" Operating Instruction preview
FlashPen "Piko"
Brand: Hama Pages: 4
Gigastone SmartBox Quick Start Manual preview
SmartBox
Brand: Gigastone Pages: 2
IBM DJNA-351010 Quick Installation Manual preview
DJNA-351010
Brand: IBM Pages: 2
Kanguru Q2S-3H-15T User Manual preview
Q2S-3H-15T
Brand: Kanguru Pages: 12
G-Technology G-Drive ev SSD Product Manual preview
G-Drive ev SSD
Brand: G-Technology Pages: 33
GARANT GridLine 930505 Instruction Manual preview
GridLine 930505
Brand: GARANT Pages: 116
Far Tools WB 100SB Original Manual Translation preview
WB 100SB
Brand: Far Tools Pages: 10
Hama Feronia 00108066 Operating Instruction preview
Feronia 00108066
Brand: Hama Pages: 8
Thunderbolt ThunderBox 400 Quick Start Manual preview
ThunderBox 400
Brand: Thunderbolt Pages: 37
ABSCO SHEDS 15141RK Manual preview
15141RK
Brand: ABSCO SHEDS Pages: 22
QNAP TS-1232XU User Manual preview
TS-1232XU
Brand: QNAP Pages: 55
SanDisk Computer Drive Quick Start Manual preview
Computer Drive
Brand: SanDisk Pages: 1
Far Group FARTOOLS BRICO WB 100 Manual preview
FARTOOLS BRICO WB 100
Brand: Far Group Pages: 8
Whalen WSWB722436W-E Quick Start Manual preview
WSWB722436W-E
Brand: Whalen Pages: 9
Toshiba TRANSMEMORY U2M-004GT Software Installation Manual preview
TRANSMEMORY U2M-004GT
Brand: Toshiba Pages: 26
Toshiba XM-7002B Specification preview
XM-7002B
Brand: Toshiba Pages: 32
Palmako FRG34-5038 Installation Manual preview
FRG34-5038
Brand: Palmako Pages: 23
Facom ROLL.C4M3 Quick Start Manual preview
ROLL.C4M3
Brand: Facom Pages: 2

Brands by name

Popular brands

Load more brands