manualshive.com logo in svg

Fujitsu ETERNUS DX S5 Series, Design Manual

The Fujitsu ETERNUS DX S5 Series comes with an easy-to-understand Operation Manual (Basic) that provides comprehensive guidance for users. This manual can be downloaded for free from our website, allowing you to access all the necessary information about your product effortlessly. Find it at manualshive.com, ensuring a smooth user experience.

Share
Download
background image

Operation Management/Device Monitoring

Operation Management Interface

Operation management software can be selected in the ETERNUS DX according to the environment of the user.
ETERNUS Web GUI and ETERNUS CLI are embedded in the ETERNUS DX controllers.
Shared folder (NFS and CIFS) operations can be performed with ETERNUS Web GUI or ETERNUS CLI for the NAS
environment settings.
The setting and display functions can also be used with ETERNUS SF Web Console.

■

ETERNUS Web GUI

ETERNUS Web GUI is a program for settings and operation management that is embedded in the ETERNUS DX
and accessed by using a web browser via http or https.
ETERNUS Web GUI has an easy-to-use design that makes intuitive operation possible.
The settings that are required for the ETERNUS DX initial installation can be easily performed by following the
wizard and inputting the parameters for the displayed setting items.
SSL v3 and TLS are supported for https connections. However, when using https connections, it is required to
register a server certification in advance or self-generate a server certification. Self-generated server
certifications are not already certified with an official certification authority registered in web browsers.
Therefore, some web browsers will display warnings. Once a server certification is installed in a web browser, the
warning will not be displayed again.
When using ETERNUS Web GUI to manage operations, prepare a web browser in the administration terminal.
The following table shows the supported web browsers.

Table 43

 

ETERNUS Web GUI Operating Environment

Software

Guaranteed operating environment

Web browser

Microsoft Internet Explorer 9.0, 10.0 (desktop version), 11.0 (desktop version)
Mozilla Firefox ESR 60, 68
Google Chrome 75

When using ETERNUS Web GUI to connect the ETERNUS DX, the default port number is 80 for http.

■

ETERNUS CLI

ETERNUS CLI supports Telnet or SSH connections. The ETERNUS DX can be configured and monitored using
commands and command scripts.
With ETERNUS CLI, SSH v2 encrypted connections can be used. SSH server keys differ for each storage system,
and must be generated by the SSH server before using SSH.
Password authentication and client public key authentication are supported as authentication methods for SSH.
For details on supported client public key types, refer to 

"User Authentication" (page 90)

.

■

ETERNUS SF

ETERNUS SF can manage storage environments that center on Fujitsu storage products. An easy-to-use interface
enables complicated storage environment design and setting operations, which allows easy installation of a
storage system without needing to have high level skills.
ETERNUS SF ensures stable operation by managing the entire storage environment.

2. Basic Functions

Operation Management/Device Monitoring 

97

Design Guide

Summary of Contents for ETERNUS DX S5 Series
















































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS DX S5 Series

Panasonic RP-SDUT128AK Owner'S Manual preview
RP-SDUT128AK
Brand: Panasonic Pages: 8
Panasonic RP-SDUC64GAK Owner'S Manual preview
RP-SDUC64GAK
Brand: Panasonic Pages: 8
Panasonic RP-SMGT128AK Owner'S Manual preview
RP-SMGT128AK
Brand: Panasonic Pages: 8
Falcon 165 Instructions For Assembly preview
165
Brand: Falcon Pages: 19
Walton 01OVLPA0806SDFW-V1 General Instructions Manual preview
01OVLPA0806SDFW-V1
Brand: Walton Pages: 6
IBM FlashSystem 710 User Manual preview
FlashSystem 710
Brand: IBM Pages: 46
IBM DS4700 EXPRESS Overview preview
DS4700 EXPRESS
Brand: IBM Pages: 8
IBM DCS3700 Installation, User'S, And Maintenance Manual preview
DCS3700
Brand: IBM Pages: 202
IBM DARA-206000 - Travelstar 12 GB Hard Drive Specifications preview
DARA-206000 - Travelstar 12 GB Hard Drive
Brand: IBM Pages: 206
IBM BladeCenter S 7779 User Manual preview
BladeCenter S 7779
Brand: IBM Pages: 28
Kikusui 3P05-PCR-LE Setup Manual preview
3P05-PCR-LE
Brand: Kikusui Pages: 6
Acard ARS-2212 User Manual preview
ARS-2212
Brand: Acard Pages: 43
Yardmaster 1013 WGY Assembly Instructions Manual preview
1013 WGY
Brand: Yardmaster Pages: 24
Hitachi HTS421210H9AT00 Specifications preview
HTS421210H9AT00
Brand: Hitachi Pages: 239
Hitachi HTS541010G9AT00 - Travelstar 100 GB Hard Drive Quick Installation Manual preview
HTS541010G9AT00 - Travelstar 100 GB Hard Drive
Brand: Hitachi Pages: 2
Hitachi HTS541010G9AT00 - Travelstar 100 GB Hard Drive Datasheet preview
HTS541010G9AT00 - Travelstar 100 GB Hard Drive
Brand: Hitachi Pages: 2
Cisco MEM2600-16D Configuration Note preview
MEM2600-16D
Brand: Cisco Pages: 18
Cisco MDS 9509 Datasheet preview
MDS 9509
Brand: Cisco Pages: 8

Brands by name

Popular brands

Load more brands