Fujitsu DESKPOWER 5000 Series User Manual Download Page 50

Page: 50 / 122

Connect the flat cable.

Connect the flat cable that is appropriate for

the internal option to be installed.

- To install two IDE-standard internal options

to the IDE secondary cable (if one of the
options is a hard disk), install the hard disk
at the master side.

- To install a SCSI interface internal option:

Connect the flat cable to the SCSI card in

the expansion slot.

- To install a floppy disk drive:

Connect the flat cable to the expansion card

of the internal floppy disk drive in the
expansion slot.

Connect the power cord.

Connect the unused power cord to the

connector of the installed internal option.

Connected to the riser board

Connected when set to the slave

Connected when set to the master

SLAVE

MASTER

Blue or red line

Pin 1

08-Chap3(34-44)

25/4/00, 10:36 am

Summary of Contents for DESKPOWER 5000 Series



























































































































Search results

Summary of Contents for DESKPOWER 5000 Series

Reviews:

Related manuals for DESKPOWER 5000 Series

Brands by name

Popular brands

Fujitsu DESKPOWER 5000 Series, User Manual

Search results

Summary of Contents for DESKPOWER 5000 Series

Reviews:

Related manuals for DESKPOWER 5000 Series

Brands by name

Popular brands