56
Mode
This item appears when 'Parallel Port' is [Enabled] or [Auto]. Set the operating mode of the
parallel port.
- Output only
Select when connecting a peripheral unit using output mode only.
- Bi-directional (Initial value)
Select when connecting a peripheral unit using bi-directional mode.
- EPP
Select when connecting an EPP standard peripheral unit.
- ECP
Select when connecting an ECP standard peripheral unit.
I/O Address
This item appears when 'Parallel Port' is [Enabled]. Set the I/O address of the parallel port.
- 378 to 37F, 278 to 27F, 3BC to 3BF (Initial value: 378 to 37F)
Interrupt
This item appears when 'Parallel Port' is [Enabled]. Set the interrupt request of the parallel
port.
- IRQ5, IRQ7 (Initial value: IRQ7)
DMA Channel
This item appears when 'Mode' is [ECP]. Set a DMA channel used to connect an ECP
standard peripheral unit.
- DMA 1, DMA 3 (Initial value: DMA 1)
●
Keyboard/Mouse Features
This submenu is used to set up the keyboard and mouse.
Move the cursor to this item and press the Enter key to display a submenu as shown below.
F1
Help
↑↓
Select Item
-/Space
Change Value
F9
Setup Defaults
ESC
Exit
←→
Select Menu
Enter
Select
:
Sub-Menu
F10
Save and Exit
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power
Boot
Info
Exit
Keyboard/Mouse Features
Numlock:
[
ON
]
PS/2 Mouse:
[Enabled]
USB Legacy Emulation:
[Auto]
Item Specific Help
Selects power-on
state for Numlock.
10-Chap4(46-62)
25/4/00, 10:37 am
56
