Fujitsu DESKPOWER 5000 Series User Manual Download

Page: 95 / 122

Error Message

An invalid hard disk drive was set.

Turn the power off, then on again.

Confirm BIOS setup items, then

save.

Because the computer was not

booted correctly last time, some

of the setup values are reset to

defaults.

If an error occurs during POST,

this message is displayed before

the OS boots.

Check date and time settings

Description and necessary action

Confirm ‘Primary master’ or ‘Secondary master’ on the

BIOS setup main menu. If the message is still displayed,

contact a dealer or the your local distributor.

If the message is still displayed, contact a dealer or the

your local distributor.

If the message is still displayed, contact a dealer or the

your local distributor.

This message is displayed if an invalid BIOS setup value

is defined to boot the system, the power is turned off

during boot, or the computer is rebooted three or more

times in the same operation. To continue booting, press

the F1 key. To run the BIOS setup utility and check setup

values, press the F2 key.

To boot booting the OS, press the F1 key. To run the BIOS

setup utility and change setup values, press the F2 key.

Confirm 'System Time' and 'System Date.'

12-Chap5(84-90)

25/4/00, 10:37 am

Summary of Contents for DESKPOWER 5000 Series



























































































































Search results

Summary of Contents for DESKPOWER 5000 Series

Reviews:

Related manuals for DESKPOWER 5000 Series

Brands by name

Popular brands

Fujitsu DESKPOWER 5000 Series, User Manual

Search results

Summary of Contents for DESKPOWER 5000 Series

Reviews:

Related manuals for DESKPOWER 5000 Series

Brands by name

Popular brands