Fujitsu AB*30LBAG series, Service Instruction

Page: 26 / 126

5-7. LOUVER CONTROL
1. VERTICAL LOUVER CONTROL
Each time the button is pressed, the air direction range will
change as follows:
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry / Fan mode Horizontal flow
Heating mode Downward flow
(Function Range)
(Fig.8 : Air Direction Range)
(Operation Range)
1-2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
The range of swing depends on the set airflow direction.
When the indoor fan is either at S-Lo or Stop mode, the swinging operation is interrupted
and the louver stops at the memorized position.
05-08
The indoor fan motor starts after the louver reaches to the setting position.
At the start of operation if the setting louver position is or ,the setting position is set to or
after the louver moves from totally-enclosed position to . (Positioning Control)
( Stop mode means Operation stop.)
1
2
3
4
1 2 3 4
1
2
3
4
1
4
Cooling / Dry mode
Heating mode
Fan mode
1 2 3
1
1
2 2
3
4
(Swinging Range)
Airflow direction set Range of swing
1
1
2
2
3
4
4
4
to
to
to
to