Fujitsu Siemens Computers STYLISTIC ST41 Series, User Manual

Page: 33 / 71

Using the Tablet PC
A26391-K129-Z121-1-7619
English - 27
Delete hand-written pen entries
Ê
Press the back part of the rocker button (facing toward the pen grip) and move the pen tip over
the characters to be deleted.
Move cursor
Ê
Hold the pen tip within 1/8 inch (3 -5 mm) from the screen and move the pen.
Calibrating the pen
To calibrate, please run the
Tablet and Pen Settings
function in the Control Panel.
Installing a pen tether
To prevent dropping or losing your pen, you should attach it to your system using the pen tether that
is available as an accessory.
1
2
3
1 = Pen tether attachment point
2 = Larger loop
3 = Smaller loop
To attach the pen to your Tablet PC, perform the following steps:
Ê Attach the end of the pen tether with the smaller loop to your pen.
To do so, push the end of the tether through the hole in the pen, then thread the opposite end
of the tether through the loop.
Ê
Attach the end of the pen tether with the larger loop to the attachment point on your Tablet PC.
To do so, insert the end of the pen tether through the attachment point, then feed the pen
through the large loop in the tether.