11
Introduction
(3) The fiber clamp release lever
The fiber clamp arms are attached to wind protector and they close when
wind-protector is closed. However, the fiber clamps can be detached by setting “clamp
arm release lever” [UNLOCK]. This option can be recommended when fiber has some
memory curl, so operator can make sure the fiber is surely clamped before
wind-protector is closed.
(4) Carrying Case with worktable.
The top cover of caring case can be detached, and used as a work table. See page 26
[How to use the work table on the carrying case].
(5)
Upgrade the software
FSM-60S’s software can be upgraded via internet by using “FSM Data Connection”
software. Refer to the instruction manual of “FSM Data Connection” software.
(6) FSM Data Connection software
Splicing condition can be downloaded and splice result is downloaded. In addition,
screen image of the monitor can also be downloaded. Refer to the instruction manual of
“FSM Data Connection” software for detail.
Notes
LCD (Liquid Crystal Display) monitor
The splicer is equipped with a LCD monitor, manufactured in a high
quality-controlled factory environment. However, some black dots may appear,
or red/blue/green dots may remain on the screen. The screen brightness may not
appear uniformly depending on viewing angle. Note that these symptoms are not
defects, but are nature of LCD.
