103
Error Message List
Error
Message
Reason Solution
• Dust or dirt is on the
fiber surface.
•Completely prepare the fiber again (strip,
clean and cleave).
• Dust or dirt is on the
objective lens or the
wind protector mirror.
• Execute the [Dust Check]. Clean the lens or
the mirror if dust or dirt exists.
L-Too Dusty
Fiber
• [Cleaning Arc] time is
too short or “OFF.”
• Set the [Cleaning Arc] time to “30ms.”
When splicing carbon coated fibers, set to
“100ms.”
• Splicing indistinct core
fibers with the SM or
DS modes.
• Use the MM mode to splice indistinct core
fibers (i.e. MM fiber).
• [Align] is set to “Core”
to splice indistinct core
fibers when using other
splice modes.
• Set [Align] to “Clad” to splice indistinct core
fibers (i.e. MM fiber).
R-Too Dusty
Fiber
• [Focus] is incorrectly
set when using other
splice modes.
• Set [Focus] to “Edge” to splice indistinct
core fibers (i.e. MM fiber). To splice distinct
core fibers, “Auto” or the correct focus value
should be entered.
