FujiFilm Frontier LP7500, Starting Manual

Page: 136 / 164

7.2 Paper jam in the paper processor section
7 – 16
If you cannot remove the upper guide due to jammed paper
If paper jams as shown below, you cannot remove the upper guide by lifting it.
Example:
For removing upper guide No. 1, see
☞
7.2.3 Paper jam around upper guide (No. 1). For the other upper guides, see
☞
7.2.4 Paper jam around upper guides.
27.
If there is paper in the upper guides or in the squeegee unit, remove it.
28.
Check the upper guides and the squeegee unit.
Check the following items.
• Guide which is distorted or comes in contact with the roller
• Detached spring
• Loose screw
• Damaged or deformed roller
• Worn gear
• Detached C-ring
If there is any damage, consult your technical representative.
29.
When transporting the processing racks, lay a cloth or a vinyl sheet on the floor to prevent the
area around the system from being stained by the solution.
30.
Move the rack stopper (rear) to the right to release the lock.
I
MPORTANT
• Specific grease is applied to the rack gears of the processing racks. Basically, you need not apply
any additional grease to them. However, if you apply grease, be sure to use the specified grease.
Using other grease may damage resin parts (e.g. tanks).
Paper
Shows the paper path.
Upper guide
G088944
Rack stopper (rear)
Rack gear
G069066