FujiFilm Frontier LP7500, Starting Manual

Page: 98 / 164

6.1 Display module
6 – 8
6.1.4 Performing Close Down Checks
When you perform Close Down Checks by using the display module, the following tasks are not performed.
If you perform them by the maintenance application, the following tasks are performed.
• Changing the program timer setting
• Saving backup of device data
If more than one type of paper can be used, select a paper type to set up
by pressing the
/ button.
Press the Enter button.
Press the Enter button.
Setup print is printed.
If the measured result is OK
Press the
Enter button.
The result is registered.
The display returns to the previous one.
If the measured result is FAIL
Press the
Enter button.
The measured result is not registered.
The display returns to the previous one.
Perform the daily setup again.
This completes the Start Up Checks.
Display Operations
Press the Menu button for a few seconds.
Press .
Display Operations
Paper type is displayed here.
<DAILY SETUP>
START PRINTING
<DAILY SETUP>
PRINTING...
<DAILY SETUP>
MEASURING...
MEASUREMENT OK
<DAILY SETUP>
MEASUREMENT FAIL
<DAILY SETUP>
START CHECKS
[MENU]