FujiFilm Frontier LP7500, Starting Manual

Page: 123 / 164

7.1 Closing down/restarting the system due to troubleshooting or in an emergency
7 – 3
7.
T
ro
u
bl
e
sh
oo
ting
w
ith
th
e
po
w
e
r
o
ff
6.
Keep the processor top cover slightly open.
(1)
Press the lever, and move the colorimeter unit to the central cutouts of the rails.
Do not press the lever while moving the unit.
When the colorimeter unit comes to the central point of the rails, the lever automatically returns to its
original position and locks the colorimeter unit.
I
MPORTANT
• When opening the processor top cover, confirm that the colorimeter unit is locked at the
central point of the rail. If the processor top cover is forcibly opened while the colorimeter unit
is at the left end of the rail without being locked, the unit falls down.
(2)
Raise the stand and keep the processor top cover slightly open.
I
MPORTANT
• If the processor top cover is kept closed, dews containing processing solution will accumulate
on the back of the cover and mix with other solutions. If a processing solution gets mixed with
a solution of a previous process, the contaminated solution cannot be used for processing. All
the contaminated solutions must be replaced.
7.
Perform the corrective actions.
7.1.2 Turning on the power supply after troubleshooting
1.
Turn on the main power supply at the installation place.
Colorimeter unit
Lever
Cutouts
Align the arrows to the central cutouts of the rails.
G088871
Processor top cover
Stand
G088938