FujiFilm Frontier LP7500, Starting Manual

Page: 36 / 164

3.1 Starting up the system
3 – 4
1.
Press the manual sorter switch for two seconds or more.
The system turns on and it starts adjusting the processing solution or the engine temperature. (The manual sorter
switch will blink.)
2.
Check whether the operation PC has started up.
If not, start it up.
3.
Wait until the temperature adjustment of the processing solution is completed.
When the temperature adjustment of the processing solution is completed, the ready lamp of the processor lights in
green.
4.
Access the Start Up Checks display.
Bringing up the display
On the Maintenance display, click Start Up Checks .
• To access from the Controller display, see Operator's Manual of the Controller.
• If performing the Start Up Checks using the display module, see
☞
6.1 Display module.
5.
Prepare the requirements for Start Up Checks and perform it following the instruction on the
display.
Example: Start Up Checks display
• For details, see
☞
Maintenance Manual 2.1 Start Up Checks.
This completes the operation.
Manual sorter switch
G088936
S5304-00-UM00