FujiFilm Frontier LP7500, Starting Manual, Page: 42 / 164

3.2 Closing down the system
3 – 10
1.
Access the Close Down Checks display.
Bringing up the display
On the Maintenance display, click Close Down Checks .
• To access from the Controller display, see Operator's Manual of the Controller.
• When performing the Close Down Checks using a display module, see
☞
6.1 Display module.
2.
Perform Close Down Checks.
• For details, see
☞
Maintenance Manual 2.2 Close Down Checks.
When you go to System End, the last item of the Close Down Checks, Would you like to set the Program Timer?
is shown.
Example: Close Down Checks display
3.
When Would you like to set the Program Timer? is shown, click No .
Backup data is automatically saved.
Close Down Checks display
A message is shown for confirmation.
I
MPORTANT
• Do not turn off the circuit breaker of the printer until the following display is shown.
4.
Click OK .
This exits the Maintenance Application.
5.
Turn off the circuit breaker.
S5305-00-UM00F
S5305-00-UM00F
S093632