3.1 Starting up the system
3 – 2
3.1 Starting up the system
Take an appropriate action referring to the chart below.
*1. The following conditions are also included.
• When the temperature of the processing solutions is being adjusted on the program timer.
• When the working of the system is stopped by the program timer.
3.1.1 Starting up the system automatically using the program timer
With the program timer, processing solution temperature is adjusted according to the processable time of the system.
1.
Confirm that the ready lamp of the processor lights in green.
When the ready lamp of the processor lights green, the temperature adjustment of the processing solutions is
completed.
2.
Check whether the operation PC has started up.
If not, start it up.
3.
Access the
Start Up Checks
display.
Bringing up the display
On the
Maintenance
display, click
Start Up Checks
.
• To access from the Controller display, see
Operator's Manual
of the Controller.
• If performing the Start Up Checks using the display module, see
☞
6.1 Display module.
The circuit breaker is
turned on.
The breaker is turned off.
Turn on the circuit breaker.
• See
☞
3.1.4 Starting up the system when the breaker is off.
Is the ready lamp of the
processor lighting up in
green?
Is the ready lamp of the processor
flashing in green?
Is the ready lamp of the
processor off?
The temperature
adjustment of the
processing solutions is
completed.
• See
☞
3.1.1 Starting
up the system
automatically using
the program timer.
The program timer is being
activated.
*1
When the manual sorter switch
lamp is lit:
•
☞
3.1.3 Starting up the
system while the program
timer is being activated
When the manual sorter switch
lamp is off:
•
☞
3.1.2 Starting up the
system during the
temperature adjustment of
processing solutions
The temperature of the
processing solutions is being
adjusted. (When turning on
the power supply)
• See
☞
3.1.2 Starting up
the system during the
temperature adjustment
of processing solutions.
.
Start
No
Yes
No
No
Yes
Yes
Yes
Summary of Contents for Frontier LP7500
