Step 1.
Open the
front cover of your machine.
Slit glass cleaning wand
Charge cleaner wand
Step 2:
Remove waste
container
Press in green tabs on both ends of
the waste container to release.
Pop out and carefully remove waste container from machine
Page 1: ... cover of your machine Slit glass cleaning wand Charge cleaner wand Step 2 Remove waste container Press in green tabs on both ends of the waste container to release Pop out and carefully remove waste container from machine ...
Page 2: ...he hole directly above the black sticker Carefully push gray wand back as far as it will go It will not go back the entire length of the wand Run the cleaner front to back a few times Re peat for each color Y M C B For void areas on prints and copies follow Step 3 For lines on prints and copies skip to Step 4 ...
Page 3: ... facing up into the hole below the green sticker Black triangle on the end of the green wand will be facing upright Carefully push green wand back as far as it will go It will no go back the entire length of the wand Run the cleaner front to back a few times Repeat for each color Y M C B ...
Page 4: ... paper towel and Windex or denatured alcohol clean both the copy glass and the slit glass Lines on copies and scans could be caused by small marks or even a hair on the glass Note Do not spray cleaner directly on glass Spray cleaner on cloth paper towel then wipe the glass ...
