FujiFilm Frontier DE100, Operation Manual, Page: 175 / 188

- Frontier DE100 Operation Guide -
7-29
Various troubles
7
TROUBLESHOOTING
Symptom What to do
Print quality is poor, uneven, too
light, or too dark.
Is the Event Photo Mode ON?
Check the settings in the Maintenance Tool.
See
$
“6.2.5.3 Event Photo Mode” (Page 6-22) for more details.
The printed surface is scuffed or
soiled.
Is the paper too thick or too thin?
Check that the paper can be used with this printer.
See
$
“8.3 Printer Specifications” (Page 8-5) for more details.
The back of the print is soiled. Is the gutter block lifted or soiled?
Check the status of the gutter block. Clean or replace the gutter block according
to its conditions.
See
$
“6.1.2 Gutter Block” (Page 6-3) for more details.
The paper is creased. Are you using the printer at normal room temperature?
The printer should be used at normal room temperature (temperature: 15 to 25
°C, humidity: 40 to 60 %).
The color is not exactly the same
as another printer.
Colors vary depending on the printer type due to each printer’s
characteristics.
Because inks, printer drivers, and printer profiles are developed for each printer
model, the colors printed by different printer models are not exactly the same.
The print is not positioned
properly on the paper.
Have you specified the print area?
Check the print area in the settings of the application and the printer.
Are the paper size settings correct?
If the option selected for “Paper Size” in the printer driver does not match the
paper size (width) loaded in the printer, the print may not be in the correct
position or some of the data may be printed over the edges of the paper.
Check the “Paper Size” setting on the printer driver’s “Setup” screen.
See
$
“2.3.2.1 “Setup” Screen” (Page 2-8) for more details.
Margins appear in borderless
printing.
Are the settings for the print data in the application correct?
Make sure that the paper settings in the application are correct as well as in the
printer driver.
See
$
“3.2.2 Borderless Printing” (Page 3-20) for more details.