manualshive.com logo in svg

FujiFilm Frontier DE100, Operation Manual, Page: 90 / 188

Share
Download
FujiFilm Frontier DE100 Operation Manual Download Page 90

5-2

- Frontier DE100 Operation Guide -

Replacing Paper

5.1  Replacing Paper

This section explains how to remove paper from the roll paper feeder, and load new paper.

5.1.1  Notes When Replacing Paper

5.1.1.1  Special Paper

We recommend you use the following paper for high-quality printing results.

• 

FUJIFILM Quality Dry Photo Paper (Glossy)

• 

FUJIFILM Quality Dry Photo Paper (Luster)

• 

FUJIFILM Quality Dry Photo Paper (Silk)

5.1.2  How to Replace

5.1.2.1  Preparing to Replace Paper

Prepare the following items.

Item Prepared

Explanation

New paper for loading

-

Cloth or vinyl rug

Spread it out where the spindle unit will be loaded/removed so that the 
paper does not become soiled.

Soft cloth  
(Two or more sheets)

• 

Clean the inside of the roll paper feeder 

(

$

 Page 5-7)

.

• 

Clean the leading edge of the paper before installing 

(

$

 Page 

5-10)

.

Gloves

Wear when handling paper so that the paper does not become soiled.

Summary of Contents for Frontier DE100





























































































































































































Reviews:

No comments