manualshive.com logo in svg

FujiFilm Frontier DE100, Operation Manual, Page: 158 / 188

Share
Download
FujiFilm Frontier DE100 Operation Manual Download Page 158

7-12

- Frontier DE100 Operation Guide -

When an Error Occurs

7.1.2.4  Software Errors

Error ID

Message

X-034E

The USB cable might have been connected/disconnected during printing.
Restart the printer and submit the print instruction again.

X-2111, X-2113 to X-2116, 
X-2121, X-2123 to X-2128, 
X-2131, X-2133 to X-2138, 
X-2301, X-2303 to X-2315, 
X-2317, X-2319 to  X-232C

Driver package abnormality occurred.
Restart the PC.

X-2112, X-2122, X-2132, 
X-2302, X-2316, X-2318

Driver package memory abnormality occurred.
Restart the PC and refrain from starting applications you’re not going to use.

X-2130

USB communication abnormality occurred.
Restart the PC and printer.

X-213A

Printer setup failed.
Wait 5 minutes and restart printer and PC.
Do not turn off PC or printer, or perform printer operations such as printing or 
launching maintenance tool while setup is in progress.

X-2330

Driver package abnormality occurred.
The maintenance tool was launched during printer initialization. Restart the PC and 
printer.

X-2331, X-2332

Driver package abnormality occurred.
Restart the PC and printer.

Summary of Contents for Frontier DE100





























































































































































































Reviews:

No comments