manualshive.com logo in svg

FujiFilm Frontier DE100, Operation Manual, Page: 153 / 188

Share
Download
FujiFilm Frontier DE100 Operation Manual Download Page 153

- Frontier DE100 Operation Guide -

7-7

When an Error Occurs

7

TROUBLESHOOTING

Error ID

Message

W-1112

Exhausted cartridge (Y) is installed.
Replace it with a new one.

W-1115

Cannot detect the ink cartridge (K).
Install ink cartridge (K).

W-1116

Cannot detect the ink cartridge (C).
Install ink cartridge (C).

W-1117

Cannot detect the ink cartridge (M).
Install ink cartridge (M).

W-1118

Cannot detect the ink cartridge (Y).
Install ink cartridge (Y).

W-1317

Used maintenance cartridge is installed.
Replace it with a new one.

W-1318

Cannot detect the maintenance cartridge.
Install a maintenance cartridge.

W-1342

A paper jam has occurred within the top cover.
Remove the paper following the operation manual, and then reload the paper.

W-2101

Paper different from printing condition is loaded.

Replace the paper with the correct paper type and width and then press the OK button.

W-2102

Printing has been paused. 

Press OK button to resume printing.

W-2106

Printer is now offline.

Check the connection of the printer power cable or USB cable. 

W-2129

USB communication abnormality occurred.
Check the connection of the USB cable.

W-232D

Driver package memory abnormality occurred.
Submit print instruction again after PC system memory is available.

Summary of Contents for Frontier DE100





























































































































































































Reviews:

No comments