FujiFilm Frontier DE100, Operation Manual, Page: 134 / 188

6-22
- Frontier DE100 Operation Guide -
Maintenance tool
6.2.5.3 Event Photo Mode
You can reduce the first print time by enabling the event photo mode.
Normally, use this mode switched OFF.
Important:
• You can only shorten the first print time when the number of print in the order is one.
• Event photo mode reduces print times by skipping drying. Therefore, the printed colors
take longer to dry than normal printing.
• Color differences may occur between dry and non-dry areas if you overlap ejected
printouts until the printed colors stabilize. For this reason, do not overlap the printouts
after printing.
• If the colors do mix, the color differences should disappear once the printed paper has
dried.
1.
Click the [Operation Condition Settings] on the main screen.
The “Operation Condition Settings” screen is displayed.
2.
Click the [ON] or [OFF] button, and then click the [Set] button.
Setting
Item
Explanation
ON Enables the Event Photo Mode.
OFF Disables the Event Photo Mode.
The result dialog is displayed.
3.
Click the [OK] button on the dialog.