FujiFilm FinePix FinePix S9600, Service Manual

Page: 132 / 154

5-6
5. Inspection
FinePix S9100/S9600 Service Manual
(2) 5.00 ± 0.05 V
(5) 650 mA or less.
If the current
consumption exceeds the
above value, it is OK if
the current drops into the
standard range within 10
seconds. If the current is
still outside the standard
range after 10 seconds,
the camera is faulty.
(1) AUTO
(2) Pop down
(4) Closed
(5) Closed
(6) OFF
(7) S-AF
(8) Center position indicator
located close to the
center.
(9) Set to extreme W
(10) Closed
(11) Multi
(12) Fitted
(13) New The default SETUP
frame No. setting is
“Continuous”, but to clear
the number of frames in
the frame number
memory to zero, you
should always change the
setting to “New” before
turning the camera off.
14
15
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)
Current
consumption
check
Factory setting
(1) Connect the power
supply jig to the DC IN
terminal.
(xD-Picture card loaded,
no Microdrive)
(2) Set the power supply
voltage.
(3) Set the Mode dial to
AUTO and turn the
camera on.
(4) Press the EVF/LCD
selector switch.
(5) After the LCD live image
appears, check the
current consumption.
(1) Mode dial
(2) Flash
(3) Battery and cards not
inserted
(4) Card cover
(5) Battery cover
(6) Power switch
(7) Focus mode selector
switch
(8) EVF dioptric adjustment
dial
(9) Zoom position
(10) Jack cover
(11) Photomemory selector
dial
(12) Sync terminal
(13) SETUP frame No.
Auto mode
LCD-ON ZJ00580-100