FujiFilm FinePix FinePix S9600, Service Manual

Page: 94 / 154

4-26
4. Adjustments
FinePix S9100/S9600 Service Manual
4-11. [F5] : Camera Adjustment
(shutter adjustment, adjustment for reduced aperture sensitivity, ISO sensitivity adjustment, white balance adjustment, AE
adjustment, offset level adjustment)
< Setup for Camera Adjustment> < Importance! >
1. Calibrate the pattern box before adjusting the camera.
2. Ensure that camera adjustment is carried out in dark surroundings (ideally in a darkroom
environment). If a darkroom cannot be set up, use a box painted black on the inside to cover the
camera before performing the adjustment.
<Note>
An error will occur during Camera adjustment, and adjustment cannot be completed, unless the pattern box is calibrated
correctly.
<Step 1>
Select [F5] Camera Adjustment on the [Adjustment Items Select] screen.
--> The [Camera Adjustment Preparation] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
--> The [Shutter adjustment] screen appears.
Camera Adjustment
< Camera Adjustment Preparations >
(1) Prepare the LB140 filter.
(2) Adjust the color temperature of the pattern box (PTB450)
to 6100+-50K.
(3) Adjust the luminance of the pattern box (PTB450)
to 160+-5cd/m
2
.
(4) Set the camera in front of the pattern box.
(5) Set the zoom position to the side of the WIDE edge.
(6) Darken surroundings.
When preparations (1)-(6) are complete,
press the [Enter] key on the PC.
<Fig. 4-11-1>
Camera
Filter (LB140)
Pattern box
Maximum 40mm
Centerline
Maximum 30mm
Maximum 70mm
Centerline