FujiFilm FinePix FinePix S9600, Service Manual

Page: 130 / 154

5-4
5. Inspection
FinePix S9100/S9600 Service Manual
7
8
9
10
11
Movie/audio
recording check
Movie/audio
playback check
Playback check
Playback mode
check
Erase mode check
Movie
mode
LCD-ON
Playback
Playback
Playback
Erase
(1) Set the Mode dial to
Movie shooting mode.
(2) Press (S1 -> S2) and
then release (S2 -> S1).
(3) Hold down S1 for 5
seconds and then
release.
(1) Set the camera to
Playback mode.
(2) Press the 4-way button
(down) to play back the
movie.
(1) Check images shot at
macro resolutions
(manual photography)
(2) Turn the camera off.
(1) Insert a card.
(2) Set the Mode dial to
Playback mode.
(3) If a message prompting
the user to set the date
appears, press the button
specified on the right.
(4) Check the playback
image.
(1) Select “Erase” -> “Erase
all” from the menu and
then press the “OK”
button.
(2) Press the “OK” button
again.
(1) Check that “STANDBY”
appears on the LCD
monitor.
(2) Check that movie/audio
recording begins.
Check that “REC”
appears on the LCD
monitor.
(3) Check that movie/audio
recording ends and that
the data is recorded on
the card.
(2) Check that the movie is
played back on the LCD
monitor.
Check that the sound is
played back through the
speaker.
(1) Where the horizontal is
as follows:350 TV lines or
better at the center and
300 TV lines or better at
the periphery (NTSC).
300 TV lines or better at
the center and 250 TV
lines or better at the
periphery (PAL).
(3) <DISP/BACK>
(4) Check that the last image
shot appears, regardless
of whether it is automatic
or manual.
Check that the date is
displayed in the
YYYY.MM.DD format.
(1) Check an erase message
such as the following
appears:
Japan: “
OK?”
Overseas: “ERASE ALL
OK?”
China: “
OK?”
(2) Check that the recorded
images are erased.
TV monitor
ZJ00525-100
Sequemnce Item Mode Preparations for adjustment
(measurement points, subject, other)
Method of adjustment
(VRs, waveforms, required values)
Measuring
equipment and jigs
Measurement points
(VRs, positions)