FujiFilm FinePix FinePix S9600, Service Manual

Page: 38 / 154

2-24
2. Disassembly
FinePix S9100/S9600 Service Manual
23mm
ZS00116-100
Apply the K TAPE (19 x
23 mm) from a position
no more than 1 mm from
this protrusion.
The entire tape is folded
back over on both sides.
BB17892-100
Application position
Left-right: Left edge of the metal plate
Up-down: The corner where the plate
begins
Stick as much of the tape as possible
to the backing plate also (so that it
covers the screw heads).
The tape must not go any further left
than this line.
Pressure must NOT be applied to this section.
Overall view
2-11-7. Sticking K TAPE onto the LCD FPC
Purpose: To protect the LCD FPC
2-11-8. Sticking K TAPE onto the SHEET EMI-FRAME
Purpose: To ensure conductivity between the two metal plates