FujiFilm FinePix FinePix S9600, Service Manual

Page: 108 / 154

4-40
4. Adjustments
FinePix S9100/S9600 Service Manual
4-14. [F6] : AF Adjustment
<Setup for AF Adjustment>
(1) Set the camera in the zoom drive jig.
(2) Set up the camera so that the distance from the multi-stripe chart to the front edge of the camera's filter ring is 897.3±1
mm.
(3) Illuminate the AF chart with a light source. Ensure that the brightness at the surface of the AF chart is between 8.0 to
10.0EV. (Check that the aperture is set to [F2.8] at the wide-angle zoom setting.)
(4) Set the conversion lens on the base.
<Step 1>
Select [F6] AF Adjustment on the [Adjustment Items Select] screen.
—> The [AF Adjustment Preparation] screen appears.
Lens Holder
Lens Base Plate
Lens Stand
Attention when conversion lens is used.
Convex side : Subject side.
Plane : Camera lens side.
Washer
(Plastic) Fixed side
897.3mm±1mm
S9100/S9600
Multi-stripe chart
Fluorescent
light stand
Centerline
Camera
800mm conversion lens
Conversion lens
flat side
897.3mm±1mm
803.3mm±1mm
Filter ring edge
S9100/S9600 Multi-stripe chart
Zoom drive jig