Fuji Xerox DocuPrint CP405 d, User Manual

Page: 169 / 306

Using the Operator Panel Menus
169
Network Setup
Use the
Network Setup
menu to change the printer settings affecting jobs sent to the printer through the wired or
wireless network.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Ethernet
NOTE:
• Ethernet feature is available only when the printer is connected using the wired network.
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the
printer is turned off and then on again.
Values:
• Wireless Status
NOTE:
• Wireless Status feature is available only when the printer is connected using the wireless network.
Purpose:
To confirm the wireless communication status.
Values:
*The settings can be configured only on CWIS.
Auto
*
Detects the Ethernet settings automatically.
10BASE-T Half Uses 10BASE-T Half-duplex.
10BASE-T Full Uses 10BASE-T Full-duplex.
100BASE-TX Half Uses 100BASE-TX Half-duplex.
100BASE-TX Full Uses 100BASE-TX Full-duplex.
1000BASE-T Full Uses 1000BASE-T Full-duplex.
Connection Good
Acceptable
Low
No Reception
Encryption Type No Security
WEP
WPA-PSK-TKIP
WPA2-PSK-AES
Mixed mode PSK
WPA-Enterprise-TKIP*
WPA2-Enterprise-AES*
Mixed mode Enterprise*