Fuji Xerox DocuPrint CP405 d, User Manual

Page: 219 / 306

Troubleshooting
219
 Streaks Appear on the Output
 Part or the Entire Output Is Black
Problem Action
Streaks appear on the output. The toner cartridges may be low or need to be replaced. Confirm the amount of toner
in each toner cartridge.
1 Check the toner level in the Status Monitor window.
2 Replace the toner cartridges as necessary.
If the problem persists, replace the drum cartridges if you have spare cartridges.
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 256
• "Installing the Drum Cartridges" on page 259
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Problem Action
Part or the entire output is black. Ensure that the drum cartridges are installed correctly.
See also:
• "Installing the Drum Cartridges" on page 259
If the problem persists, ensure Output Color is set to Color in the print driver.
Ensure Output Color is set to Color in the print driver. The following procedure uses
the PCL 6 driver as an example.
1 On the Color Options tab, ensure that the Output Color is set to Color .
If the problem persists, replace the drum cartridges if you have spare cartridges.
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 256
• "Installing the Drum Cartridges" on page 259
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.