Fuji Xerox DocuPrint CP405 d, User Manual

Page: 209 / 306

Troubleshooting
209
Regi Jam (Exit Sensor On JAM)
Exit Jam (Exit Sensor Off JAM)
Problem Action
Regi jam (Exit Sensor On JAM)
occurs. Ensure that the drum cartridges are installed correctly.
If the problem persists, replace the drum cartridges if you have spare cartridges as
instructed in
"Replacing the Drum Cartridges" on page 256 .
Replace the drum cartridges if you have spare cartridges.
See also:
• "Replacing the Drum Cartridges" on page 256
If the problem persists, ensure that the fusing unit is installed correctly.
Ensure that the fusing unit is installed correctly.
If the problem persists, replace the fusing unit as instructed in
"Replacing the Fusing
Unit" on page 262 .
Replace the fusing unit.
See also:
• "Replacing the Fusing Unit" on page 262
If the problem persists, ensure that the belt unit is installed correctly.
Ensure that the belt unit is installed correctly.
If the problem persists, replace the belt unit, the 2nd BTR, and the retard roller as
instructed in
"Replacing the Belt Unit, the 2nd BTR, and the Retard Roller" on
page 265 .
Replace the belt unit, the 2nd BTR, and the retard roller.
See also:
• "Replacing the Belt Unit, the 2nd BTR, and the Retard Roller" on page 265
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.
Problem Action
Exit jam (Exit Sensor Off JAM)
occurs. Ensure that the fusing unit is installed correctly.
If the problem persists, replace the fusing unit as instructed in
"Replacing the Fusing
Unit" on page 262 .
Replace the fusing unit.
See also:
• "Replacing the Fusing Unit" on page 262
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.