1.5 Enabling Ports
37
1.5
Enabling Ports
Set all ports you want to use to [Enabled] on the control panel.
When using the standard setup, this operation is unnecessary as the default for the port is
set to [Enabled].
Use the following procedure to enable each port.
The following procedure uses IPP as an example.
1.
On the control panel, press the <Printer
Settings> button to display the menu
screen.
2.
Press the < > button until [Admin Menu] is
displayed.
3.
Press the < > or <OK> button to select.
[Network / Port] is displayed.
4.
Press the < > or <OK> button to select.
[LPD] is displayed.
Note
• [Parallel] appears only when the Parallel Port Kit
(optional) is installed.
5.
Press the < > button until the desired
protocol is displayed. (Example: IPP)
6.
Press the < > or <OK> button to select.
[Port Status] is displayed.
7.
Press the < > or <OK> button to select.
The current set value is displayed.
8.
Press the < > button to display [Enabled].
9.
Press the <OK> button to confirm your
selection.
10. The setting is now complete.
Press the <Printer Settings> button to close
the menu screen.
The printer automatically restarts.
Settings
LanguageEmulation
Settings
Admin Menu
Admin Menu
Network / Port
Network / Port
LPD
Network / Port
IPP
IPP
Port Status
Port Status
•
Disabled
Port Status
Enabled
Port Status
•
Enabled
Summary of Contents for DocuPrint 3105
Page 1: ......
Page 44: ...68 3 Printing 3 Click Custom Paper Size 4 Click Setup 2 3 4...