Fuji Electric PEN102J1C, User Manual

Page: 36 / 85

17
・Operate it after charging with UPS for 24 hours set up first time or after it
preserves it for a long time.
Attention
・A few arcs might occur when EBM is connected with UPS.
・Cconnect the connector of EBM with the connector of UPS firmly.
・Do not work by a wet hand. It is likely to get an electric shock.
３-３-７ Tower type EBM Installation
Figure ３-10 EBM connection
１. When EBM is connected, the battery connector cover on the back of
UPS and the back of EBM is removed, and renewed.
２. An accessory of EBM battery cable is connected with the battery
connector of UPS and EBM.
３. In addition, when you install one EBM, the battery connector cover on
the back of EBM that has already been installed and EBM of the
addition is removed, and renewed. An accessory of EBM battery cable
is connected with the battery connector of EBM and EBM.
・Operate it after charging with UPS for 24 hours set up first time or after it
preserves it for a long time.
Attention
・A few arcs might occur when EBM is connected with UPS.
・Cconnect the connector of EBM with the connector of UPS firmly.
・Do not work by a wet hand. It is likely to get an electric shock.
UPS BATTERY CONNECTOR COVER
EBM BATTERY CONNECTOR COVER
UPS
EBM
UPS
BATTERY CABLE
CONNECTOR COVER
EBM
BREAKER(EBM)
!
!