Fuji Electric MICREX-SX series, User Manual

Page: 36 / 58

Section 3 Inverter Communication
3-4
3-4 Error Code
Function code group
Function code
(Hexadecimal) Write/read No.
(Decimal)
F 00 00 to 99
E 01 00 to 99
C 02 00 to 99
P 03 00 to 99
H 04 00 to 99
A 05 00 to 99
o (lowercase) 06 00 to 99
S 07 00 to 99
M 08 00 to 99
L 09 00 to 99
J 0D 00 to 99
y (lowercase) 0E 00 to 99
W 0F 00 to 99
X 10 00 to 99
Z 11 00 to 99
3-5 Inverter Function Code and Write/Read No.
The table below shows the “function codes” and “write/read Nos.” of an inverter. Set them as follows:
Code Name Cause
00 Normal end This indicates a normal response frame that the inverter issued.
1C Password verification error Password mismatch
1D Password setting response This is a response to a request for password setting.
1E No password registered Although no password is registered, a password is entered.
20 Undefined command received A command cannot be processed because it is not defined.
21 Split parameter error There is no continuity between SEQ_NO and end information.
22 Parameter error
Œ
Connection method setting error (The connection method is not "7A".)
Œ
Number of bytes is erroneous.
23 Interlock error Transmission interlock code is erroneous.
2A Invalid command received
Although processing is not in progress, a continue or cancel command is
received.
2B Other loader processing in progress
When processing is in progress, a command other than continue or cancel
command is received.
Note: For detail specifications of the function code, refer to the manual of the inverter function.