Section 2 System Configuration
2-8
2-2 System Definition
<Output detail setting>
When multiple tasks are used, you can specify which output of the expansion I/O board can be controlled by which task in units
of bit or word.
Select an I/O expansion board for “output detail setting” and click the [Detail...] button. The following dialog is displayed.
Initially, all bits are selected.
Set the bit to be controlled by the default task to ON and the bit to be controlled by other task to OFF. Then, click the [OK]
button.
Select other task in the level and click the [Detail...] button to display the dialog. Set the bit to be assigned to the task to ON.
Click the [OK] button to complete the setting.
