1-11
Section 1 PLC Specifications
1-2 PLC Internal Memory
(8) System stop error factor %MW10.22 to %MW10.27 (Read only)
Address
Name
Description
Level
%MX10.22.0
Not used
%MX10.22.1
System definition error
Set to "ON" when the contents of the system
configuration definition in this board do not match
the actual system configuration.
Fatal fault
%MX10.22.2
|
%MX10.22.9
Not used
%MX10.22.10
CPU operation definition error
Set to "ON" when the CPU number in this board is
different from the CPU number set in thec system
definition.
Fatal fault
%MX10.22.11
CPU memory boundary definition error
Set to "ON" when the memory space used by an
application program exceeds the total memory
capacity.
Fatal fault
%MX10.22.12
|
%MX10.22.14
Not used
%MX10.22.15
CPU operation definition 2 error
Set to "ON" when the definition of operation of this
board is erroneous.
Fatal fault
%MX10.23.0
CPU I/O group definition error
(for default tasks)
Set to "ON" when input is defined for output.
Fatal fault
%MX10.23.1
CPU I/O group definition error
(for level 0 tasks)
%MX10.23.2
CPU I/O group definition error
(for level 1 tasks)
%MX10.23.3
CPU I/O group definition error
(for level 2 tasks)
%MX10.23.4
CPU I/O group definition error
(for level 3 tasks)
%MX10.23.5
|
%MX10.23.15
Not used
%MX10.24.0
Not used
%MX10.24.1
I/O initialization error
Set to "ON" when an error is found in the operation
setting for the I/O.
Fatal fault
%MX10.24.2
|
%MX10.26.15
Not used
%MX10.27.0
Inverter communication operation
definition error
Set to "ON" when the definition of operation of
inverter communication is erroneous.
Fatal fault
%MX10.27.1
|
%MX10.27.15
Not used
