INF-TN2FSC-E
73
10.1.3 UNIT OF OUTPUT: when changing unit of each output
Flow rate unit: Select the unit of flow rate and output range.
Metric system:
L/s, L/min, L/h, L/d, kL/d, ML/d, m
3
/s, m
3
/min, m
3
/h, m
3
/d, km
3
/d, Mm
3
/d, BBL/s, BBL/min,
BBL/h, BBL/d, kBBL/d, MBBL/d
English system: gal/s, gal/min, gal/h, gal/d, kgal/d, Mgal/d, ft
3
/s, ft
3
/min, ft
3
/h, ft
3
/d, kft
3
/d, Mft
3
/d, BBL/s,
BBL/min, BBL/h, BBL/d, kBBL/d, MBBL/d
Flow rate total: Select the unit of flow rate.
Metric system:
mL, L, m
3
, km
3
, Mm
3
, mBBL, BBL, kBBL
English system: gal, kgal, ft
3
, kft
3
, Mft
3
, mBBL, BBL, kBBL, ACRE-ft
Temperature: Select the unit of temperature input.
Metric system: °C
, K
English system: F, K
Heat flow:
Select the unit of heat flow and output range.
MJ/h, gJ/h, BTU/h, kBTU/h, MBTU/h, kW, MW
Thermal total: Select the unit of total thermal.
MJ, gJ, BTU, kBTU, MBTU, kWh, MWh
Note) For the change of SYSTEM UNIT, refer to “10.3.1(2) SYSTEM UNIT”.
Direction of selected unit
Display
Logger
Printer
Flow rate unit
: The unit selected by the unit of output is used.
Flow rate total
: The unit selected by measurement screen is used.
Temperature
Heat flow
Thermal total
[Operation]
(1) Press the or key on the SITE SETUP page and
select “UNIT OF OUTPUT”. Then, press the
ENT
key.
This function enables you to set unit of flow rate, total, temperature and total heat quantity.
