50
INF-TN2FSC-E
8.4.3 Method of mounting belt
Followings are description how to use the belt selected at 6th digit of code of symbols.
It is described based on FSSC type and it is also reference for other types.
CAUTION
Please use the gloves and the pliers when conducting work on stainless steel belt.
Otherwise, you may hurt yourself.
(1) Stainless steel belt (6th digit: A)
1-1) Put the belt through the hole of the
rail end and wrap it around the pipe.
1-3) Return the belt at the end of the
latch.
1-5) Lock the latch.
Please make sure the tension of the
belt to put the latch back on.
When tension is not tight enough, go
back to the procedure 1-3) and make
an adjustment.
After locking the latch, make sure
to cut the extra length of the belt or
wrap it around the pipe.
1-2) Put the belt through the latch.
1-4) Put the latch back on.
