FC Series w/ EDC Control
Thermal
MNL-047-A
Division Rev.
004
FTS
10
Stone Ridge, NY USA
845.687.0071
USER MENU
This unit is equipped with an EDC digital control package. Varying the parameters in the EDC Controller’s
User Menu allow the operation of the unit to be fine tuned to meet the needs of a specific application. A
variety of parameters such as Ramp Rate, Auto-Power Recovery, High and Low Temperature Alarms,
Parameter Lock, Setpoint Limits, readout options, Proportional Control parameters, and several
Communications options can all be adjusted from the User Menus.
The layouts of the menus and parameters contained in those menus are shown on the following pages. They
are navigated using the three buttons on the front panel of the EDC Controller. The legends on the
following pages show how to use these buttons to move around the menus and manipulate the values of the
various parameters.
A programmer’s reference is included at the end of this manual. This reference provides a complete
description of the command set used when to communicating with this unit via RS-232.
Adjust
Parameter
Value
Press & Hold
or
To view Menus
Choose Menu
I/O
Move down to next
parameter
Summary of Contents for FLEXI-COOL FC100
Page 4: ...iv...
