76
CP-100 • User’s Guide
4. Operation
Using the Setup Menu
When
SEL
is pressed, the following message is briefly displayed.
Figure 4-44.
Programming EDID Message 1
If the programming is successful, the following message is displayed:
Figure 4-45.
Programming EDID Message 2
If the EDID programming failed, the following message will be displayed:
Figure 4-46.
EDID Programming Failed Message
If this message persists, please contact customer service for technical support.
•
Type (7, 8)
— This field applies to inputs
7
and
8
only, allowing you to select
between
Digital
or
Analog
EDID for these inputs. Please note:
~
When the
Input
field is set to inputs 1 - 6, the
Type
field shows
[ANALOG]
, and cannot be changed.
~
When the
Input
field is set to
7
or
8
, the
Type
field is selectable between
ANALOG
or
DIGITAL
, and the current
Type
is reflected. Changing this
field triggers the programming process as soon as
SEL
is pressed, using
the currently shown resolution in the
Format
field.
~
When
ALL
is selected in the
Input
field, the
Type
field reflects Input
7
.
Any triggering of the programming process changes both inputs
7
and
8
to the selected option in this field.
P r o g r a m m i n g E D I D
P l e a s e w a i t . . .
E D I D P r o g D o n e
C o n n e c t D V I i n p u t s
a n d r e b o o t t h e P C
E S C = C o n t i n u e
Note
At this point, reboot the external computer(s) in order for the
new EDID information to be read, and the new preferred
resolution to become available.
E D I D P r o g f a i l e d !
E S C = C o n t i n u e
