FSR Compass Plus CP-100, User Manual

Page: 65 / 163

CP-100 • User’s Guide 65
4. Operation
Using the Setup Menu
A confirmation message is briefly displayed, after which the system returns to the
Input Menu .
Figure 4-30. Deleting Input Configuration Message (sample)
oÉÅ~ää=`çåÑáÖ
From the Input Menu , select Recall Config to restore a configuration file that was
previously associated with the current input. Using the Recall Config Menu shown in the
following illustration, you can change from the current configuration file for the input to any
saved configuration file.
Figure 4-31. Recall Config Menu (sample)
A number in brackets indicates the only file that is available for recall. If no files are
available, a message will be displayed to indicate that there are no saved files.
After you select a file number and choose Recall File , press SEL to initiate the recall or
ESC to continue using the current configuration.
When you press SEL , if the input timing matches the timing in the recalled input
configuration file, the input uses the recalled configuration file immediately. The File
Association Menu is also updated to reflect your change.
If the input and configuration file timings do not match and In Auto Acquire is ON , an “auto
acquire” will be performed. For more information about this function, refer to the
“
Understanding Auto Acquire ” section on page 84.
D e l e t i n g I n p u t F i l e
R E C A L L C O N F I G
> F i l e N u m b e r
4 1
R e c a l l F i l e