CP-100 • User’s Guide
73
4. Operation
Using the Setup Menu
•
If the CP-100 finds a DHCP server and receives an IP address,
the address is displayed.
•
If a server is not found, an IP address is not assigned.
•
Config Network
— select this function to display the
Config Network Menu
,
which enables you to choose the specific Ethernet address you wish to change.
Figure 4-38.
Config Network Menu
~
Select
Set Static IP
to display the
Static IP Menu
, which enables you to
set a static IP address when a DHCP server is not available. The editing
procedure is discussed below.
Figure 4-39.
Static IP Menu
~
Select
Set Netmask
to display the
Netmask Menu
, which enables you
to set a netmask. The editing procedure is discussed below.
Figure 4-40.
Netmask Menu
~
Select
Set Gateway
to display the
Gateway Menu
, which enables you to
set a gateway. The editing procedure is discussed below.
Figure 4-41.
Gateway Menu (sample)
C O N F I G N E T W O R K
> S e t S t a t i c I P
> >
S e t N e t m a s k
> >
S e t G a t e w a y
> >
S T A T I C I P
>
1 9 2 . 16 8 . 0 0 0. 0 0 1
N e t m a s k
>
2 5 5 . 25 5 . 2 5 5. 0 0 0
G a t e w a y
>
1 9 2 . 16 8 . 0 0 0. 0 0 2
