CP-100 • User’s Guide
63
4. Operation
Using the Setup Menu
p~îÉ=`çåÑáÖ
After you use the
Input Menu
to change one or more input settings, you can save the
changes by selecting
Save Config
.
Save Config
saves input configuration parameters in
non-volatile memory. You can save the changes to the current configuration file for the
selected input, or to a different file.
To save changes to an input’s configuration, use the following procedure:
1.
Select
Save Config
from the
Input Menu
. A menu like the one in the following
illustration appears.
Figure 4-26.
Save Config Menu (sample)
2.
Select a value for
File Number
, or keep the default file number.
If you save to another configuration file, the
File Association
Menu
is updated to
associate the new file to the current input.
3.
Scroll down to
Save File
and press
SEL
.
A confirmation message is briefly displayed, after which the system returns to the
Input Menu
.
Figure 4-27.
Saving Input File Message (sample)
If you change a setting in the
Input Menu
and press
ESC
without
saving changes, your
change will not be restored the next time you select the input or power up the system. The
system displays the following prompt:
Figure 4-28.
Save Input Configuration Prompt (sample)
S A V E C O N F I G
> F i l e N u m b e r
2 4
S a v e F i l e
Important
You can assign a configuration file to more than one input. If
you do so, you must exercise caution when deleting the file,
because it will be deleted for all inputs.
S a v i n g I n p u t F i l e
S a v e I n p u t C f g ?
< S E L > = Y e s
< E S C > = N o
