Fry's Electronics FR-54RTR User Manual Download Page 104

Page: 104 / 104

100

FR-54RTR User Manual

Appendx E - Warranty

FCC Statement:

Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal devce, pursuant to part 15 of the FCC Rules.

These lmts are desgned to provde reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths equpment

generates, uses, and can radate rado frequency energy and, f not nstalled and used n accordance wth the nstructons, may cause

harmful nterference to rado communcaton. However, there s no guarantee that nterference wll not occur n a partcular nstallaton.

If ths equpment does cause harmful nterference to rado or televson recepton, whch can be determned by turnng the equpment off

and on, the user s encouraged to try to correct the nterference by one or more of the followng measures:

• Reorent or relocate the recevng antenna.

• Increase the separaton between the equpment and recever.

• Connect the equpment nto an outlet on a crcut dfferent from that to whch the recever s connected.

• Consult the dealer or an experenced rado/TV techncan for help.

For detaled warranty nformaton applcable to products purchased outsde the Unted States, please contact the correspondng local

Fry’s office.

Summary of Contents for FR-54RTR









































































































Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands

Fry's Electronics FR-54RTR, User Manual

Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands