Fry's Electronics FR-54RTR User Manual Download

Page: 33 / 104

FR-54RTR User Manual

Section 3 - Configuration

Check the box to enable the DHCP server on

your router. Uncheck to dsable ths functon.

Enter the startng and endng IP addresses for

the DHCP server’s IP assgnment.

The length of tme for the IP address lease.

Enter the Lease tme n mnutes.

If NetBIOS advertsement s swtched on,

swtchng ths settng on causes WINS

nformaton to be learned from the WAN sde,

if available. Turn this setting off to configure

manually.

Ths s an advance settng and s normally left

blank. This allows the configuration of NetBIOS

doman name under whch network hosts

operate. Ths settng has no effect f the “ Learn

NetBIOS nformaton form WAN s actvated.

Enable DHCP

Server:

DHCP IP

Address

Range:

Lease Time:

Learn NetBIOS

from WAN:

NetBIOS

Scope:

DHCP Server Settings

DHCP stands for Dynamc Host Control Protocol. The FR-54RTR has a bult-n DHCP server. The DHCP Server wll

automatcally assgn an IP address to the computers on the LAN/prvate network. Be sure to set your computers to be

DHCP clents by settng ther TCP/IP settngs to “Obtan an IP Address Automatcally.” When you turn your computers on,

they wll automatcally load the proper TCP/IP settngs provded by the FR-54RTR. The DHCP Server wll automatcally

allocate an unused IP address from the IP address pool to the requestng computer. You must specfy the startng and

endng address of the IP address pool.

Summary of Contents for FR-54RTR









































































































Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands

Fry's Electronics FR-54RTR, User Manual

Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands