Fry's Electronics FR-54RTR User Manual Download

Page: 20 / 104

FR-54RTR User Manual

Section 3 - Configuration

If you selected Dynamc, you may need to enter the MAC address of the

computer that was last connected drectly to your modem. If you are currently

usng that computer, clck

Clone Your PC’s MAC Address

and then clck

Next

to contnue.

The Host Name s optonal but may be requred by some ISPs. The default

host name s the devce name of the Router and may be changed.

If you selected PPPoE, enter your PPPoE username and password. Clck

Next

to contnue.

Select

Static

f your ISP assgned you the IP address, subnet mask,

gateway, and DNS server addresses.

Note:

Make sure to remove your PPPoE software from your computer. The

software is no longer needed and will not work through a router.

If you selected PPTP, enter your PPTP username and password. Clck

Next

to contnue.

Summary of Contents for FR-54RTR









































































































Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands

Fry's Electronics FR-54RTR, User Manual

Search results

Summary of Contents for FR-54RTR

Reviews:

Related manuals for FR-54RTR

Brands by name

Popular brands